Other

Master Cylinder

  • Master cylinder or cylindrical squares made generally as per IS-6952
  • Made out of good quality alloy steel.
  • Fully hardened, ground and lapped.
  • Provided with durable lifting handle.
Product code Size in mm Length x Diameter Ø Squareness tolerance in µm (as per IS 6952)
471-51-105 150 X 70 2
471-51-105 200 X 80 3
471-51-115 300 X 95 5
471-51-120 450 X 120 7
471-51-125 500 X 140 7
471-51-130 600 X 140 9
471-51-135 750 X 160 11

*Other sizes on request.

Engineers Square (Try square)

  • Made generally as per IS : 2103.
  • Made from good quality alloy steel.
  • Hardened, ground & stabilized.
  • Hardness: 58 HRC (Up to size 300 mm)
  • Jobs above 300 mm are unhardened & hand scraped on the main working surfaces.
Product code Type-2 Plain & bevelled edge Size in mm Perpendicularity in µm (as per IS-2103)
424-51-100 75 X 50 X 4 3
424-51-105 100 X 70 X 5 3
424-51-110 150 X 100 X 6 4
424-51-115 200 X 140 X 6 4

*Other sizes on request.

Product code Type-3 Plain & bevelled edges with flange Size in mm Perpendicularity in µm (as per IS-2103)
434-51-100 300 X 200 X 8 5
434-51-105 500 X 300 X 10 10
434-51-110 600 X 400 X 10 10
434-51-115 750 X 500 X 12 15
434-51-120 1000 X 750 X 12 25

*Other sizes on request.

Granite Square

  • Made out of select black granite having uniform texture and colour.
  • Very dense & hard wearing, needs no oiling.
  • Velvet lapped finish on working surfaces.
  • All four sides can be used as working surface with the opposite sides parallel to each other.
Product code Size in mm Squareness tolerance in µm
441-11-100 300 X 300 X 50 3
441-11-105 400 X 400 X 60 4
441-11-110 500 X 500 X 80 5
441-11-115 800 X 800 X 80 7

*Other sizes on request.

Cast Iron & Granite Cube

  • C.I. cube is made out of good quality close grained high density alloyed cast iron castings conforming to Grade FG-220 of IS: 210.
  • Stress relieved and hand scraped surfaces.
  • Granite cube is made out of select black granite having uniform texture & colour.
  • Very dense and hard wearing, needs no oiling
  • Velvet lapped finish on working surfaces.

*All the three dimensions of the cube may not be same. For Same dimension place special order.

Product code Size in mm Squareness tolerance in µm Parallelism of Opp. faces in µm
451-21-100 200 X 200 X 200 4 5
451-21-105 300 X 300 X 300 5 8
451-21-110 500 X 500 X 500 10 15

*Other sizes on request.

Granite & Steel Parallels

  • Granite parallels are made out of selected black granite of uniform texture.
  • Steel parallels are made out of good quality of steel that is hardened, ground and lapped.
  • All the four faces can be used as working surface.
Product code Size in mm Parallelism of faces in µm
481-51-100 150 X 30 X 15 5
481-51-105 200 X 40 X 20 6
481-51-110 250 X 50 X 25 6
481-51-115 300 X 60 X 30 7

*Other sizes on request.

Granite Parallels


Product code Size in mm Parallelism of faces In µm
481-11-100 150 X 50 X 55 3
481-11-105 200 X 100 X 50 4
481-11-110 250 X 100 X 50 5
481-11-115 300 X 100 X 50 6

*Other sizes on request.

Comparator Stand

  • Comparator stands made out of good quality of castings consists of a very stable base and an upright column with a dial mounting bracket with & without fine adjustments.
  • Granite comparator stands are made out of select black granite with a very rigid fixing of steel pillar for the dial mounting bracket with & without fine adjustment.
Product code Base Size in mm of Comparator (Granite) Maximum working height In mm
501-11-100 150 X 100 X 50 100
501-11-101 200 X 150 X 50 150
501-11-102 300 X 200 X 50 200

*Other sizes on request.

Product code Base Size in mm of comparator (Cast Iron) Maximum working height In mm
501-11-100 58 dia 100
501-11-101 75 X 75 100
501-11-102 100 X 100 150

*Other sizes on request.

Anti Vibration Table

  • Reduces vibration disturbances that are caused by nearby equipment or generated from the floor.
  • Anti-vibration pads placed below granite table top.
  • Granite top of thickness 50 mm provided with a glazed surface.
  • Suitable for QC room, laboratory, and workshops where equipment such as precision balance, roughness tester, hardness tester, gauge block calibrator, ULM etc. are placed.
  • Utility space for tools and equipment and optional power sockets at back side.
  • Customisable size and colour of hardboard.
Product code Size in mm Working height in mm
529-01-100 1600x800 800
529-01-101 2000x800 800

*Other sizes on request.